Technical Data - Festool A-225EN Manual De Instrucciones

5) Battery tool use and care
a) Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the switch
on invites accidents.
b) Recharge only with the charger specifi ed
by the manufacturer. A charger that is suitable
for one type of battery pack may create a risk of
fi re when used with another battery pack.
c) Use power tools only with specifi cally des-
ignated battery packs. Use of any other battery
packs may create a risk of injury and fi re.
d) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a connec-
tion from one terminal to another. Shorting
Various dust created by power sanding, sawing, grinding, drilling and other construc-
tion activities contains chemicals known (to the State of California) to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
The risk from these exposures varies, depending on how often you do this type of
work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as dust masks that are specially designed to
fi lter out microscopic particles.
Cordless drill/screwdriver
Motor voltage
Idle-running speed: 1. speed / 2. speed
Max torque: soft case / hard case
Adjustable torque: 1. speed / 2. speed
Chuck capacity
Max. drill diameter for metal / wood
Tool fi tting in chuck
Weight without battery pack
Charger
Supply voltage (input) / line frequency
Charging voltage (output)
Charging current
• Quick charge
• Compensation charge, pulsating
Charging time for
Battery pack
Order number
Voltage
Capacity
Temp. range for charging
Monitoring of charge
Weight

Technical data

• NiCd 1.3 Ah
• NiCd 2.4 Ah
• NiMH 3.0 Ah
BPS 12 C NiCd
493 348
12 V
1.3 Ah
5 - 45 °C
by means of NTC thermistor
0.56 kg (1.2 lbs)
the battery terminals together may cause burns
or a fi re.
e) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, fl ush with wa-
ter. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali-
fi ed repair person using only identical re-
placement parts. This will ensure that the safety
of the power tool is maintained.
To reduce the risk of injury,
user must read and understand instruction
manual.
C 12
12 V
0 – 450 rpm / 0 – 1500 rpm
18 Nm / 30 Nm
2 – 7 Nm / 0.5 – 2.5 Nm
1.5 – 13 mm
14 mm / 25 mm
1/4 "
0.96 kg (2.1 lbs)
LC 45
120 V ~ / 60 Hz
7.2 - 18 V (DC)
max. 3 A
app. 0.06 A
app. 30 min
app. 50 min
app. 70 min
BPS 12 S NiCd
492 268
12 V
2.4 Ah
5 - 45 °C
0.73 kg (1.6 lbs)
3
BPS 12 S NiMH
491 821
12 V
3.0 Ah
5 - 45 °C
0.75 kg (1.7 lbs)