Original Operating Manual 1 Symbols; Machine Features; Intended Use; Technical Data - Festool C 12 Li Manual De Instrucciones

C 12 Li, C 15 Li
GB
Original operating manual
1 Symbols................................................
2 Machine features .................................
3 Intended use.........................................
4 Technical data ......................................
5 Safety instructions ...............................
6 Operation..............................................
7 Settings ................................................
8 Tool holder, attachments .....................
9 Working with the machine ...................
10 Service and maintenance.....................
11 Accessories ..........................................
12 Environment.........................................
13 Transport..............................................
14 Warranty...............................................
15 EU Declaration of Conformity ..............
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
4

Technical data

Cordless drill
Motor voltage
Idling speed*
Max. torque
Adjustable torque**
Chuck clamping range
Drill diameter max.
Tool holder in drill spindle
Weight without battery pack with Centrotec
12
Wear protective gloves.
12
12
Do not throw in the household waste.
12
12
2

Machine features

13
[1-1] Torque thumbwheel
14
[1-2] Bit store
14
[1-3] LED lamp
15
[1-4] Gear switch
15
[1-5] Drilling symbol
15
[1-6] Screwdriving symbol
15
[1-7] Drilling/Fastening selector switch
16
[1-8] Right/left switch
16
[1-9] On/Off switch
16
[1-10] Capacity display
16
[1-11] Belt clip
[1-12] Buttons for releasing the battery pack
3

Intended use

Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The charger TRC 3 is designed for charging the bat-
tery packs listed.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
1st gear
2nd gear
Soft material (wood)
Hard material (metal)
1st gear
2nd gear
Wood
Metal
C12 Li C15 Li
10.8 - 12 V 14.4 - 15.6 V
0 - 450 rpm
0 - 1500 rpm
20 Nm 25 Nm
34 Nm 40 Nm
0,5 - 8 Nm
0,5 - 6 Nm
1,5 - 13 mm
25 mm 35 mm
14 mm 16 mm
1/4 '' 1/4 ''
1,0 kg 1,0 kg