Idiomas disponibles
Idiomas disponibles
O Installation Procedures
First complete the electrical connections, and then
The included
mounting collar @ is designed
check them for correctness. (page 70)
specifically for this unit. Do not use it to attach
any other model.
insert mounting collar @ into the dash-
1
board, and bend the mounting tabs out
with a screwdriver.
(49 Flat-head screw
Mounting
spring (L) | 6
x
The tabs to be bent vary depending on the
car. To securely install the unit, fully bend a
number of the tabs so that there is no rattling.
Example:
.
ee
--"" — Mounting holes
Mounting bolt
~J © Mounting spring (R)x
Attach the mounting springs O), @ to the
unit.
Ca
Secure the rear of the unit.
After fixing mounting bolt 6) and power con-
nector ©, fix the rear of the unit to the car
body by either method (a) or (b) shown below.
Insert trim plate ©.
P e— O Flat-head screw
- Mounting springs
(a) Using the rear support strap ©
(b) Using the rubber cushion (option)
Fire wall of car
Rear support bracket
Rubber cushion (option)
(provided on the car)
@) Tapping screw
f
3 mmo
(2 Hex. nut
Rear support
strap
(5) Mounting bolt
© Mounting collar
67
CQ-HX1083/HR1003U
