Idiomas disponibles
Idiomas disponibles
Installation Guide
AN WARNING
This
installation
information. is de-
signed for experienced installers and is
not intended for non-technical individu-
als. it does not contain warnings or cau-
tions of potential dangers involved in
attempting to install this product.
O Installation Hardware
No. | item
| Diagram | arty
fea Mounting collar
Sl
bl al EC LA
oy Rear support strap
@ | Tapping screw
ka (5 mm@ x 16 mm)
F
ka Mounting bott (5 mmo} gl
@ | Removable face plate
<>
7
case
<=)
Flat-head screw
(5mm@x6 mm)
x tock cance! plate
ST
O Overview
This product should be installed by a professional.
However, if you plan to install this product yourself,
your first step is to decide where to install it.
64
CQ-HX1083/HR1003U
Power connector
| PAN
Any attempt to install this product in a
motor car by anyone other than quali-
fied installer could cause damage to the
electrical system and could result in se-
rious personal injury or death.
The instructions in these pages will guide you |
through the remaining steps:
(Piease refer to the "WARNING"
statement
above.)
e identify and label the car wires.
e Connect the car wires to the wires of the power
connector.
e install the unit in the dashboard.
e Check the operation of the unit.
If you encounter problems, please. consult your
nearest professional installer.
Caution:
eThis unit operates with a 12 V DC negative
ground auto battery system only. Do not at-
tempt to. üse it in any other system. Doing so
could: cause serious damage.
Before you begin installation, look for the items
which are packed with your unit.
e Warranty Card...Fill this out promptly.
Panasonic Servicenter List for Service Directory
...Keep for future reference in case the product
needs servicing.
|
e Installation Hardware... .Needed for in-dash in-
stallation.
( Required Tools
You'll need a screwdriver, a 1.5 V AA battery, and
the following:
12V DC
Electrical
Side-cut
Test bulb
tape
i
pliers
S
<=
