Erreka PUMA Manual Del Instalador página 40

INSTALLATION

General connections
A.T (ST1) Total opening key command
A.P (ST2) Pedestrian opening key command
SG.C Closing safety device (mechanical strip
or photocell)
AUX Output (24Vac, 300mA)
Constant output in order to feed
peripheral devices
STOP Emergency pushbutton
DEST Flashing light (125/230Vac, max. 60W)
Connection of safety transmitter-receiver photocells in closing (SG.C)
40
Installation Manual
(ST1, start)
(ST2, pedestrian)
A1
SMF
FCC
FCA
SW1
ANT
R.E

We recommend installing safety photocells.
1 Complete the connections as shown in the figure.
O If neither photocells nor a mechanical strip are connected,
make an electrical bridge between cable connectors (2) and (4).
Operator motor
Traffic light card AEPS1-001
Magnetic closing limit switch (Hall effect
sensor)
Magnetic opening limit switch (Hall
effect sensor)
Main switch
Cable connectors for antenna
Plug-in receiver
(close)
(open)
P145X