Idiomas disponibles
Idiomas disponibles
Domus 4/English
◼
Static
Press the button to suspend alternating function, if needed. The pressure inside
of air tubes will be adjusted to the same softness. Press the button again; it will
switch back to alternating mode. Under the static mode, cell pressure level will
be lowered compare to the same pressure level from alternating mode.
Seat Inflate
◼
The seat inflation increases the pressure for every cells to support the patient
during upright position without bottoming out. User can select this additional
feature under either static or alternate mode.
Alarm Mute
(3)
Press alarm mute button to temporary suspend the low-pressure alarm (LED light
and buzzer). Should the situation not resolved within 5 mins, the alarm shall resume
to notify the patient.
◼
PFA (Power Failure Alarm)
During power failure situation, the Power Failure LED light will lit on with buzzer.
By pressing the mute button to disable both buzzer and LED.
Low Pressure Indicator
◼
When low pressure LED lights up, the pressure inside of air mattress is below
normal. Please refer to troubleshooting.
◼
Tech. Support
This feature will light during mechanical failure situation. User can notify the
technician for repair.
Panel Lock
(4)
If the control panel remains untouched for 5 minutes, a green LED will light and the
control panel will lock all settings. This will prevent the settings from being accidently
changed during normal operation. To unlock, simply press the Panel lock button for
three seconds.
6
