Idiomas disponibles
Idiomas disponibles
Domus 4/English
Voltage
dips,
interruptions
voltage variations on
power supply input lines
IEC61000-4-11
Power frequency
(50/60Hz)
magnetic
field
IEC61000-4-8
NOTE: UT is the a.c. mains voltage prior to the application of the test level
Guidance and Manufacturer's Declaration - Electromagnetic Immunity:
This device is intended for use in the electromagnetic environment specified below.
The user of this device should make sure it is used in such an environment.
Immunity Test IEC60601
level
± 2 kV line(s) to
earth
<5 % UT (>95 %
dip in UT)for 0,5
cycle
40 % UT (60 %
short
dip in UT)for 5
and
cycles
70 % UT (30 %
dip in UT)for 25
cycles
<5 % UT (>95 %
dip in UT)for 5
sec
3 A/m
test
Complian
ce
± 2 kV line(s) to
line(s)
<5 % UT (>95 %
dip in UT) for 0,5
cycle
40 % UT (60 %
dip in UT) for 5
cycles
70 % UT (30 %
dip in UT) for 25
cycles
<5 % UT (>95 %
dip in UT) for 5
sec
3 A/m
Electromagnetic Environment-Guidance
Portable and mobile RF communications
equipment should be used no closer to any
part of this device, including cables, than
there
commended
calculated from the equation applicable to the
frequency of the transmitter.
Recommended separation distance
=
150kHz to 80MHz
d
1
2 .
P
=
80MHz to 800MHz
d
1
2 .
P
=
800MHz to 2.5GHz
d
2
3 .
P
16
or
hospital
environment.
Mains power quality
should be
that of
atypical
commercial
or
hospital
environment. If the
user of this device
requires
continued
operation
during
power
mains
interruptions,
it
recommended
the
device
powered
from
uninterruptible power
supply or a battery.
Power
frequency
magnetic
fields
should be at levels
characteristic
atypical location in a
typical commercial or
hospital environment.
separation
distance
is
that
be
an
of
