Maintenance
in front of the fire and ob-
serve which lamp needs to be
changed.
3.
Turn the unit off, and unplug
the cassette.
4.
Leave the appliance for 5 min-
utes to allow the lamps to cool
down before removing them.
5.
Remove the water tank and
top cover (Figure 6) by lifting
upwards and place in a sink.
6.
Remove the defective bulb,
by gently lifting vertically and
disengaging the pins from the
lamp holder.
7.
Carefully insert the two pins of
the new bulb into the two holes
in the lamp holder. Push lamp
firmly in place.
8.
Gently place the media tray
and media (if applicable) back
into position.
Cleaning
It is recommended that all of the
components that contain water are
cleaned with soap and water on a
biweekly basis. A small brush has
been included to assist in cleaning
difficult items/areas, i.e. the trans-
ducer.
CAUTION: Do not put plastic
components in the dishwasher.
14
Filter Cleaning
The air filter can be removed and
gently rinsed with water to clean
and dried on a towel before rein-
stalling.
!
NOTE:
Replace the filter so that
the course black filter is facing the
front of the cassette.
Surface Cleaning
Use a warm damp cloth only to
clean surfaces of the cassette. Do
not use abrasive cleaners.
!
NOTE: If you need to move the
unit ensure that all of the compo-
nents that contain water have been
emptied before relocating.
Servicing
Except for installation and cleaning
described in this manual, an autho-
rized service representative should
perform any other servicing.
www.dimplex.com