Idiomas disponibles
Idiomas disponibles
6.2 INSERTING A SAW BLADE
• Rotate the tool-free blade clamp ring anti-clockwise and hold. Insert the blade into the
saw's blade clamp and make sure that the blade attaches to the blade pin inside the
clamp. Release the blade clamp ring and ensure the blade is locked securely in place.
• Check the tight seating of the saw blade. loose saw blade can fall out and lead to
injuries. For certain work, the saw blade can also be turned through 180° (with the
teeth pointed upwards) and reinserted again.
6.3 REMOVING A SAW BLADE
• Rotate the tool-free blade clamp ring anti-clockwise and hold. Pull the blade out and
release the clamp ring.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS
7.1 BATTERIES
• Never attempt to open these for any reason.
• Do not store in locations where the temperature may exceed 40°C.
• Charge only at ambient temperatures between 4 °C and 40 °C.
• Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged
condition.
• It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a
year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.
• When disposing of batteries, follow the instructions given in the section "Protecting the
environment".
• Do not cause short circuits. If a connection is made between the positive (+) and
negative (-) terminal directly, or via accidental contact with metallic objects, the battery is
short-circuited and an intense current will flow, causing heat generation which may lead
to casing rupture or fire.
• Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators
and other polymer components may be damaged, resulting in electrolyte leakage and/or
internal short-circuiting leading to heat generation causing rupture or fire. Moreover, do
not dispose of the batteries in fire, as an explosion and/or intense burning may result..
• Under extreme conditions, battery leakage may occur. When you notice liquid on the
battery, proceed as follows:
a) Carefully wipe the liquid off using a cloth. Avoid skin contactl.
b) In the event of skin or eye contact, immediately rinse with water. Neutralise with
a mild acid such as lemon juice or vinegar
c) In case of eye contact, rinse abundantly with clean water for at least 10 minutes.
Consult a physician
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do
not incinerate the battery.
29
