Operating Instructions; Keyboard Operation; Tare - Gibertini Crystal Serie Manual De Usuario

ENGLISH

6. OPERATING INSTRUCTIONS

Wait for about 3 hours after power-up before performing any high accuracy weighing operation.
It is advisable to leave the balance permanently on (connected to the AC line).
It is possible to switch off only the display with the ON/OFF key, this allows a quick recovery when the
balance is switched on.
Crystal balances have ranges with capacity of 110 g, 210 g, 310 g, 510 g with up to 0.1 mg resolution.
Pressing the ON/OFF key, after the display test, the indication 0,0000 g. appears.
If the instrument has not been used for more than an hour, perform a weighing operation with at least 10 g
before high precision measurements.

7. KEYBOARD OPERATION

The keyboard has four control keys: PRINT, MODE, TARE, ON-OFF.
Every key has a specific function, while keys MODE, TARE and ON-OFF also acivate a second function.
If the keys are activated for less than 1 second the first function is activated, when pressed for more the
second function will be active.
The table below shows the operation capabilities.
KEY KEY ACTIVATED FOR LESS
NAME
On/Off Display illumination on/off
Mode See additional functions

Tare

Print
KEY KEY ACTIVATED FOR LESS
NAME
On/Off
Mode Scroll available items
Tare Exit current selection
Print
8. TARE
After a container is placed on the pan, push the TARE key to zero the reading.
The balance has a tare capacity up to its total measuring range.
Place the sample to be weighed in the container.
The display shows the sample net weight.
It is possible to use the tare key again and again after adding several samples, up to the maximum capacity
of the balance, indicated by a bargraph on the left side of the LCD display.
Page 22 of 45
THAN 1 SECOND
Tare function
Print function
Main & configuration menu
THAN 1 SECOND
Confirm selection
No function
Normal use
KEY ACTIVATED FOR MORE THAN 1
See additional functions
KEY ACTIVATED FOR MORE THAN 1
INSRUCTION MANUAL - 60.50.630 9th issue –December 2014
CRYSTAL analytical balance
SECOND
Balance on/off
Tare function
No function
SECOND
No function
No function
No function
No function