Installation - Gibertini Crystal Serie Manual De Usuario

ENGLISH

4. INSTALLATION

Instructions to remove the locking device of the
balance
♦
Unpack the balance and all its accessories.
♦
Unscrew the knob on the locking bracket as
indicated by the arrow (anti clockwIse).
♦
Retain the locking bracket in case the balance
has to be returned to the supplier. This bracket
can be refastened to the balance by reolacing
the knob.
Level the balance using the spirit level on the rear and rotating the levelling feet under the front part of the
basement (Fig 3).
Insert the drip cup in its support, log the protection ring on top of the drip cup (NO for models 500), insert the
pan.
Insert the power supply cable located on the rear panel (Fig 2).
Insert the power supply in the main line plug checking the supply voltage printed on the power supply case
(100 / 240 Vac ) - (Fig 2).
Serial Output
Spirit level
Power supply
connector
Page 20 of 45
FIG. 2 - Rear panel details
INSRUCTION MANUAL - 60.50.630 9th issue –December 2014
CRYSTAL analytical balance
FIG. 1
locking
bracket