Idiomas disponibles
Idiomas disponibles
Koh cet-MolaMdal-memdlale
The O-ring assures the waterproof function of the marine
pack. To maintain waterproof integrity, use it correctly.
Incorrect handling may cause water to leak in.
O-ring
Front shell
Rear shell
Mi:
t re rages eee mera
eae
If there are any, replace the damaged O-ring with a new
one. Do not remove the O-ring from the groove with a metal
tool or a tool with a sharp point.
Scratches
Crack
Check there is no dust, sand or hair on the O-ring, or in the
groove or on the surface of the marine pack where it
touches. If there is, remove them completely, or the O-ring
and the surface of the marine pack may be damaged and
water may leak in.
Dust
Surface of the marine pack
where the O-ring touches
O-ring groove
Hair
Sand
O-ring
are.no. scratches or cracks. |
Scratches or cracks on the O-ring may cause water to leak in.
The grease protects the O-ring from wear.
Check that there are no cracks or dust on the O-ring, then
grease it using a finger. During greasing, recheck that there
are no cracks or dust.
Never use cloth or paper for greasing because the fibers
may cling.
Do not use any type of grease other then the supplied one,
or it may damage the O-ring.
Put the O-ring in the groove evenly. Never twist it.
Not this way
Pa
Serban ht Ok Rees Anarene Se 1
12 O-ring
with the marine pack.
When jointing the front and rear shells, take care not to trap
the O-ring between the front and rear shells. If this happens,
not only will the O-ring be damaged, but also water may
leak in.
Put the supplied spare O-rings in the original carton and
store it in a cool place.
¢ Do not expose the O-ring to direct sunlight.
¢ Do not place a heavy object on the O-ring.
¢ Donot fold the O-ring.
It depends upon the maintenance and the length of use, but
we recommend changing it every one or two years. Use the
Sony ACC-810M marine pack maintenance kit (not
supplied) to replace.
