DELTA DORE TYDOM 2.0 Manual De Utilización página 18

2. Personalising TYDOM 2.0
2.5 Voice/text messages
You can select a voice call and SMS
for each number in the contact list.
The Voice/SMS option can be configured from the
CLT 8000 TYXAL+ touch screen keypad.
Example: you have 5 numbers recorded, of which 2 are SMS. (no.2 and no.4)
Ê The transmitter dials the first recorded number,
if the contact does not pick up or if they do not ac-
knowledge the call, the transmitter then sends an SMS
to no.2.
The transmitter continues the cycle and calls no.3,
sends an SMS to no.4 then dials the 5th number record-
ed if no-one picks up.
Ë If no contact picks up, the transmitter repeats the cycle:
no.1, no.3, no.5, etc.
TYDOM 2.0 does not send any other SMS during the
following cycles and stops automatically after 4 consecu-
tive cycles.
A programmed number with SMS distribution option
will automatically receive the video link in case of
intrusion. (upon detection of a DMBV TYXAL+)
2.6 SMS alert for designated contacts function
This menu is used to send an SMS to a programmed number if the system is switched on or off.
Example: your child comes home and deactivates the system via the remote control or badge reader, the
telephone transmitter sends you an SMS.
Ê Enter the installer code (default 6-digit code can be found on a
label on the back of the control unit)
and confirm with OK.
Ë Press Settings, then select the menu:
Installation > Products > Configure
Ì Press the T1 button (external button) of TYDOM 2.0
or select it from the list of products by clicking
on 'Browse'.
Í Select the 'SMS alert to relatives' menu.
Î From the list, select the number or numbers concerned by
the SMS warning by pressing Select.
Ï Confirm with OK.
Check that the 'SMS alert to relatives' option is activated in
the 'Settings' menu of the remote control or badge associated
with the function.
Ê Ë
1 6 9 12
n°1 n°1 n°1
2 7 10
13
n°3 n°3
n°2
3 8 11 14
n°5 n°5
n°3
4
n°4
Automatic
5
n°5
shutdown
TY2 0 03 01 SMS alert to relatives
Remote monitoring
SMS alert to relatives
SIM card
Back Ok
Select.
Auto attendant
Alarm control unit monitoring
Remote control
Name
SMS alert to relatives
SMS alert to relatives
Ok
Back
Activate >
Back Ok
34
2.7 Auto attendant
The auto attendant enables you to obtain vocal information on the status of your
installation when you are near the telephone transmitter (e.g. "your alarm system
is on"). You can activate or deactivate it.
Ê Enter the installer code (default 6-digit code can be found on a
label on the back of the control unit)
and confirm with OK.
n°1
Ë Press Settings, then select the menu:
n°3 Installation > Products > Configure
Ì Press the button of the transmitter or select it from the
n°5
list of products by clicking on 'Browse'.
Í Select the 'Auto attendant' menu, then 'Activate' or
'Deactivate' (Î).
- Voice/SMS distribution option
Refer to the Call numbers section
Ok
TY2 0 03 01 Auto attendant
Incoming calls
Auto attendant Activate
Alarm control unit monitoring
Auto attendant
Back Ok Back
< Desactivate
Back
35
EN
>
Ok
Ok