3.
m
• Replace light bulb cover by placing cover over light
bulb. Insert and tighten screw.
bu
/Light
bulb
cover
-- Screw
Freezer Section
Remove ice bucket by lifting bucket and pulling out.
Remove light bulb cover by removing 1/4"hex nut
screw. Replace bulb with 60-watt appliance bulb.
Replace light bulb cover by holding cover in place
over light bulb. Insert and tighten screw.
4. Replace ice bucket by sliding in until bucket locks in
place.
_i
S crew
_
_=--- Light bulb
cover
Lig
bulb
Ice and Water Dispenser (some models)
Light bulb is located between dispenser arms.
• Remove light bulb by unscrewing light bulb. Replace
light bulb with a 6-watt, 120-volt bulb.
• Replace light bulb by inserting and tightening bulb.
• Keep door gaskets clean and pliable. Replace gaskets
if worn.
• Keep condenser coils clean.
Vacation
Tips
Complete the following steps for short vacations.
1.
Remove perishable foods.
2.
If an ice maker is installed, move ice maker arm up,
to Offposition. (See Automatic Ice Maker
Instructions)
Complete the following steps for long vacations.
1.
Empty refrigerator and freezer sections.
2.
Unplug refrigerator.
3.
Clean refrigerator and door gaskets according to
General Cleaning in Care and Cleaning section.
4.
Prop doors open, so air can circulate inside.
5.
If an ice maker is installed, turn water supply to
refrigerator off and move ice maker arm up, to Off
position.
rq
O
Light bulb
Ice and Water
Dispenser
Energy Tips
This refrigerator is designed to be one of the most
energy efficient refrigerators available. Reduce energy
use by observing the following.
• Operate in normal household temperatures of 55 ° to
110°F (13 ° to 43°C) away from heat sources and
direct sunlight.
• Set refrigerator, freezer, and temperature controlled
meat drawer controls no colder than necessary.
• Keep freezer section full.
12