Speaker Leads; Power Amp (Sold Separately) - Pioneer AVH-X8850BT Manual De Instrucciones

Connection
9 Blue/white
Connect to system control terminal of the power amp (max.
300 mA 12 V DC).
a Light green
Used to detect the ON/OFF status of the handbrake. This
lead must be connected to the power supply side of the
handbrake switch.
b Power supply side
c Handbrake switch
d Earth side
p The position of the handbrake switch depends on the vehicle
model. For details, consult the vehicle Owner's Manual or
dealer.

Speaker leads

1
2
L
3
5
7
F
8
6
R
c
1 To power supply
2 Power cord
3 Left
4 Right
5 Front speaker
6 Rear speaker
7 White
8 White/black
9 Grey
a Grey/black
b Green
52
c Green/black
d Violet
e Violet/black
p With a two-speaker system, do not connect anything to the
speaker leads that are not connected to speakers.

Power amp (sold separately)

1
5
1
6
R
1
4
9
9
a
1 System remote control
Connect to Blue/white cable (max. 300 mA 12 V DC).
2 Power amp (sold separately)
3 Connect with RCA cable (sold separately)
d
4 Rear outputs (REAR OUTPUT) 15 cm
e
5 Rear speaker
6 Front speaker
7 Front outputs (FRONT OUTPUT) 15 cm
8 This product
9 Subwoofer
a Subwoofer outputs
p You can change the RCA output of the subwoofer depending
on your subwoofer system.
p The subwoofer output of this product is monaural.
3 4
2
5
3
7
2
6
8
a
3
2
9