Idiomas disponibles
Idiomas disponibles
en
26
Activating and deactivating the
Fig. 15
coolant-lubricant flow (figure 15).
Do not use the magnetic core drill unit when
the cooling-lubricant system is defective.
Each time before operating, check for tight-
ness against leaks and for cracks in the hoses.
Prevent liquids from entering or penetrating
electrical components.
Insert the hose into the cooling-lubricant
connection of the machine.
The cooling-lubricant flow is actuated by
operating the hand pump.
When working overhead, use cooling-lubri-
cant paste from Slugger by FEIN.
When drilling overhead, make sure that the
battery is properly engaged and can not fall
out.
