Handling the battery.
Charge the battery only at a temperature
range from 0 °C – 35 °C (32 °F – 95 °F). At
the beginning of the charging procedure, the
battery temperature must be within the bat-
tery charging-temperature range.
Charge-control indicator on battery
(figure 4).
The charge condition can be indicated by the
green LEDs of the charge-control indicator
on the battery. The charge condition can
only be read when the battery is removed.
When the battery is mounted and the mag-
net is already activated, set the magnet lever
back to 30% or, if required, back to 0% and
then again to 100%. Press the charge-con-
trol indicator button
the charge condition.
When no LED lights up after pressing the
charge-control indicator button, the battery
is defective and must be replaced.
or
to indicate
Fig. 4
en
17
80-100 %
60-80 %
40-60 %
20-40 %
5-20 %
0-5 %