Idiomas disponibles
Idiomas disponibles
en
16
Assembly instructions.
Before mounting or replacing application tools or accessories, remove the
WARNING
battery. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Removing and charging the battery
(figure 3).
Prior to the first charging procedure,
read the operating instructions of the
battery charger.
Charge the battery completely before
putting into operation for the first time.
Release the battery by pressing the battery-
unlocking button and pull the battery out of
the handle. Do not exert any force when
doing this.
Connect the battery charger to a socket out-
let, slide the battery onto the battery char-
ger and charge the battery. After the
charging process is over, insert the battery
into the power tool and pull the plug of the
battery charger out of the socket outlet.
A new battery does not reach its full capacity
until after several charging and discharging
procedures.
Make sure that the battery is properly
engaged and can not fall out.
Fig. 3
Battery-Unlocking button
Battery
1.
1.
