Idiomas disponibles
Idiomas disponibles
LBP 125-15 18-EC
■ Use special care when working corners,
sharp edges etc. Avoid bouncing and
snagging the accessory. Corners, sharp
edges or bouncing have a tendency to
snag the rotating accessory and cause loss
of control or kickback.
■ Do not attach a saw chain woodcarving
blade or toothed saw blade. Such blades
create frequent kickback and loss of
control.
Safety Warnings Specific for
Grinding Operations
■ Use only wheel types that are
recommended for your power tool and the
specific guard designed for the selected
wheel. Wheels for which the power tool
was not designed cannot be adequately
guarded and are unsafe.
■ The grinding surface of centre depressed
wheels must be mounted below the plane
of the guard lip. An improperly mounted
wheel that projects through the plane
of the guard lip cannot be adequately
protected.
■ The guard must be securely attached
to the power tool and positioned for
maximum safety, so the least amount of
wheel is exposed towards the operator.
The guard helps to protect the operator
from broken wheel fragments, accidental
contact with wheel and sparks that could
ignite clothing.
■ Wheels must be used only for
recommended applications.
■ Always use undamaged wheel flanges
that are of correct size and shape for your
selected wheel. Proper wheel flanges
support the wheel thus reducing the
possibility of wheel breakage.
■ Do not use worn down wheels from larger
power tools. Wheel intended for larger
power tool is not suitable for the higher
speed of a smaller tool and may burst.
Additional safety instructions
■ Use suitable detectors to detect concealed
power supply cables or consult your local
supply company. Contact with electric
cables may result in a fire and/or electric
shock. A damaged gas pipe may cause an
explosion. Cutting into a water pipe will
cause damage to property or may cause
an electric shock.
■ When working, hold the power tool firmly
with both hands and ensure that you
have a secure footing. The power tool is
controlled more securely if held with both
hands.
■ Secure the workpiece. A workpiece is held
more securely in a clamping device than
by hand.
■ Dust released from materials, such as lead
paints, some types of wood, minerals and
metal, may be hazardous to the operator or
people in the vicinity. Inhaling or touching
such dust may result in respiratory diseases
and/or allergic reactions.
– Ensure the workplace is well ventilated.
– If possible, use external dust extraction.
– It is recommended to wear a respirator
mask belonging to filter class P2.
■ Do not work on materials which release
hazardous substances (e.g. asbestos).
■ Use only original batteries with the
voltage indicated on the type plate of your
power tool. The use of other batteries,
e.g. imitations, reconditioned batteries or
other makes, increases the risk of injury
and damage to property by exploding
batteries.
Safety instructions for handling
batteries
■ Do not open the battery. Short-circuiting
hazard!
■ Protect the battery against heat, including
prolonged sunshine, fire, water and
moisture. Explosion hazard!
■ A damaged or incorrectly used battery
may result in the emission of fumes. Ensure
a supply of fresh air and consult a doctor
in the event of any physical complications.
The fumes may irritate the respiratory
tracts.
■ Liquid may leak out of the battery if the
battery is incorrectly used. Avoid contact
with such liquid. If contact accidentally
occurs, rinse with water. If liquid contacts
eyes, seek medical attention. Liquid
discharged from the battery may cause
irritation or burns.
■ Use FLEX rechargeable batteries only
in connection with FLEX tools and FLEX
accessories. Only in this way is the
rechargeable battery protected against
dangerous overloads.
15
