Problem
There is no sound when you
touch the panel sensor fields.
comes on.
The control bar blinks.
and a number come on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
9. TECHNICAL DATA
9.1 Rating plate
Model IKE42640KB
Typ 61 A2A 00 AD
Induction 3.65 kW
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Nominal power
(maximum heat
setting) [W]
Middle front
2300
Middle rear
2300
Possible cause
The sounds are deactivated.
Child Safety Device or Lock oper‐
ates.
There is no cookware on the zone or
the zone is not fully covered.
The cookware is unsuitable.
The diameter of the bottom of the
cookware is too small for the zone.
There is an error in the hob.
technician or dealer will not be free of charge,
also during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
PNC 949 597 552 00
220 - 240 V 50 - 60 Hz
Made in: Germany
3.65 kW
PowerBoost [W]
3200
3200
Remedy
Activate the sounds. Refer to "Daily
use".
Refer to "Daily use".
Put cookware on the zone so that it
fully covers the cooking zone.
Use cookware suitable for induction
hobs. Refer to "Hints and tips".
Use cookware with correct dimen‐
sions. Refer to "Technical data".
Deactivate the hob and activate it
again after 30 seconds. If
again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
PowerBoost
Cookware diame‐
maximum dura‐
ter [mm]
tion [min]
10
145 - 265
10
145 - 265
ENGLISH
comes on
111