Idiomas disponibles
Idiomas disponibles
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information
1.
To reduce the risk of electric shock, ensure electricity has been
turned off at the circuit breaker or fuse box before beginning.
2.
All wiring must be in accordance with the National Electrical
Code "ANSI/NFPA 70" and local electrical codes. Electrical
installation should be performed by a quali ed licensed
electrician.
3.
The outlet box and support structure must be securely mounted
and capable of reliably supporting a minimum of 50 lb (22.7 kg)
or less. Use only UL Listed outlet boxes marked "FOR FAN
SUPPORT."
4.
The fan must be mounted with a minimum of 7 ft (2.1 m)
clearance from the trailing edge of the blades to the oor.
5.
Avoid placing objects in the path of the blades.
6.
To avoid personal injury or damage to the fan and other items,
be cautious when working around or cleaning the fan.
7.
Do not use water or detergents when cleaning the fan or fan
blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
8.
After making electrical connections, spliced conductors should
be turned upward and pushed carefully up into the outlet box.
The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the
outlet box and ungrounded conductor on the other side of the
outlet box.
9.
All setscrews must be checked and retightened where
necessary before installation.
10.
Suitable for use with solid-state speed control (JY1153H only for
AK366 & AK366A; JY1028 only for AK366B).
READ AND SAVE THESE INSTRUCTIONS
2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
The following responsible party designated in FCC §2.909 is
responsible for this declaration:
Model Number: AK366B-MBK, AK366B-TM, AK366A-MBK, AK366A-TM
AK366-MBK, AK366-TM
Company Name: TAL INTERNATIONAL CORPORATION
Company Address: 2919 E. Philadelphia St., Ontario, CA 91761, U.S.A.
Telephone Number: (909) 923-2888 Fax: (909) 923-8337
WARNING: To reduce the risk of electric shock, this fan
must be installed with an isolating wall control/switch.
WARNING: To reduce the risk of personal injury, do not bend
the blade arms (also referred to as anges), when installing
the brackets, balancing the blades or cleaning the fan.
WARNING: Do not insert foreign objects between rotating
fan blades.
WARNING: To reduce the risk of re, electric shock or
personal injury, mount the fan to the outlet box marked
acceptable for fan support with the screws provided with the
outlet box.
CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.
CAUTION: Use only with light kits marked suitable for use
in damp locations.
NOTE: Suitable for use in damp locations.
NOTE: 96" & 120" items are suitable for industrial use only.
2
7
14
16
16
