Idiomas disponibles
Idiomas disponibles
Assembly — Installing the Light Kit (optional-sold seperately)
13
Attaching the LED light kit to the
light kit mounting plate
CAUTION: Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at the
fuse box. Turning power off using the fan switch is not suf cient
to prevent electric shock.
CAUTION: Use only with light kits marked suitable for use
in damp locations.
NOTE: If the light kit could be wobbled by hand, it means the
light kit is not twisted completely till the right position. Keep
twisting the light kit till it could not be wobbled by hand.
While holding the LED light kit (DDD) under the fan motor
assembly (F), snap together the wire connection plugs (EEE):
White to white
Black to black
Position the notches (FFF) on the inner edge of the LED light
kit (DDD) so they match the tabs (BBB) on the outside of the
rim on the light kit mounting plate (CCC). Carefully lift the
LED light kit (DDD) inside the light kit mounting plate (CCC)
and secure it to the fan by turning the LED light kit (DDD)
clockwise until snug.
BBB
FFF
14
F
EEE
CCC
DDD
