ESAB Warrior 400i CC Manual De Instrucciones página 60

4 INSTALLATION
NOTE!
The mains cable areas and fuse sizes as shown above are in accordance with
Swedish regulations. Use the power source in accordance with the relevant
national regulations.
Connection instruction
The power source is connected to 440 V from the factory. If a different mains voltage is
required, the cable on the printed circuit board must be moved and placed on the correct pin.
See picture above. This operation must be carried out by personnel having appropriate
electrical knowledge.
Installation of mains cable
0221323
- 60 -
© ESAB AB 2014