Steren RAD-320 Manual De Instrucciones página 18

Belt clip
1. Place the clip,matching the holes and screw it.
Note: Is necessary to remove the clip to have access to
the battery.
CHARGING THE B TTERY
Charge the battery during 8 continuous hours or until the LED in the charging base
lights in green.
1. Connect the base into a power supply.
2. Insert the radio to the bottom of the base, matching the connectors.
While is charging, the indicator LED lights in red; when the charge is full
18
A
Note: When the battery it has low energy, the device emits
an alert tone each 30 seconds.
POW FULL
POW FULL
will change to green.
POW FULL