Idiomas disponibles
Idiomas disponibles
If multiple batteries are connected in se-
ries or in parallel, users can monitor the
charge of each individual battery.
EN
7.4 Using the control panel (optional)
The control panel lets you:
• Switch the battery on/off (storage mode).
• Monitor the charge and the main operational
parameters of the battery.
- 16 -
TLI Premium 12880031
TLI Premium 12880001
Fig. 5
TLI PREMIUM
Translation of the original instructions
1
4
2
Fig. 6
1. On/Storage slider switch
2. LEFT arrow button
3. RIGHT arrow button
4. Display
Set the slider to ON to switch on the battery.
When the battery is switched on, the display
shows the battery and its charge level and cycli-
cally displays the following parameters:
• Voltage V
• Current I
• Power P
Display of parameters V, I and P in cyclical mode
(default) is indicated by the symbol
as an automatic loop that changes the displayed
parameter every 5 seconds.
Pressing and holding the RIGHT arrow key (5 sec-
onds) lets you switch between the cyclical V, I and
P parameter display mode (default) and "Pause"
mode.
"Pause" mode is indicated by the symbol
lets you permanently display just one of the pa-
rameters.
3
and occurs
and
Rev.001
