Instructions For Use; Charging; Storage; General Information - Teleco TLI PREMIUM 12/104 Manual De Instalacion E Instrucciones De Uso

6.7 Connecting the control panel
(optional)
Caution! If correctly connected to the
battery, the control panel automatical-
ly takes control and forces the battery
On/Storage mode ("5.7 Storage").
The battery goes to On/Storage mode
set by the position of the control panel
EN
slider.
Proceed as described.
1. Unwind and connect the ethernet cable to the
RJ45 socket on the battery.
2. Secure the control panel in the desired loca-
tion.
3. Connect the ethernet cable to the RJ45 sock-
et on the control panel.
4. The control panel is enabled for control of the
battery.
Warning! Pressing the On/Storage but-
ton on the battery has no effect.
- 14 -
Fig. 3
TLI PREMIUM
Translation of the original instructions
7.

INSTRUCTIONS FOR USE

7.1 General information

Warning! Follow the instructions and
safety measures
SAFETY MEASURES").

7.2 Charging

Caution! Execute the charging proce-
dure with the battery on.
Warning! Never overload the battery as
it could be permanently damaged.
Always use a battery charger that automatically
stops when the battery is fully charged.
Warning! Stop the charging if the bat-
tery becomes too hot.
Warning! While charging, observe the
instructions given in paragraph
Technical Specifications").
Caution! Unplug the charger from the
battery if it is not used for a long peri-
od.
Caution! To preserve the life of the
battery, use a battery charger suitable
for LiFePO4 technology that meets the
technical specifications in paragraph
("2.1 Technical
use of other battery chargers, such as
those for lead acid batteries, will short-
en the battery's service life.
("5. GUIDELINES AND
("2.1
Specifications"). The
Rev.001