cecotec BOLERO COOLMARKET 2D 211 WHITE Manual De Instrucciones página 30

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
ENGLISH
6. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting the official Cecotec Technical Support Service.
Fault
Possible causes
The appliance
The appliance is not connected
does not work.
to the mains.
The switches in the electrical
installation or the fuses are
damaged.
There is no power or the fuse
trips.
The refrigerator is improperly
placed. Room temperature is
lower than 10˚C.
Abnormal
The refrigerator is not stable.
noise.
The refrigerator is too close to
the wall.
Low cooling
The food introduced is hot or
efficiency.
there is too much food.
You open the door too often.
The door gasket has objects
that do not allow to close it
completely
The appliance receives direct
sunlight or is close to a heat
source.
It is not well ventilated.
The selected temperature is too
high.
Unpleasant
There is spoiled food inside.
smells in the
The refrigerator should be
refrigerator.
cleaned.
You introduced food with strong
smells.
Note:
If none of these situations match your problem, do not attempt to disassemble or repair the
B O LE R O COOLM ARKET 2D 211 W H IT E
58
Possible solutions
Plug the appliance into the main
socket.
Open the door and check the light
is on.
Power outage or line disconnection.
Install the refrigerator in a
sheltered place where the ambient
temperature is above 10˚C. If
your refrigerator is installed at a
temperature that is too low, the
internal cooling system may not
work properly.
Set the adjustable feet of the
refrigerator.
Separate the refrigerator from the
wall.
Introduce food in the refrigerator
when it is at room temperature.
Check and close the door.
Remove the refrigerator from the
heat source.
Ventilate the room.
Correct temperature settings.
Dispose of food which is spoiled.
Clean the refrigerator.
Pack the strong smelling foods.
appliance by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried
out by an authorised technician and you must use only original spare parts.
7. TECHNICAL SPECIFICATIONS
You can find more information on this model by scanning the QR code (and the energy label as
well).
Reference:
02676
Model
Bolero CoolMarket 2D 211 White
QR code
Voltage
220-240V ~
Rated frequency
50 Hz
Rated current
0.72 A
Climate class
N, ST (*)
Refrigerant
R600a (41 g)
Insulating foam
Cyclopentane
This product features a light source with an energy efficiency grade G.
(*) Refrigerating appliance intended for use at room temperatures between 16°C and 38°C.
Technical specifications may change without prior notice to improve product quality.
Made in China | Designed in Spain
BOLERO COOLMARKET 2D 211 WHITE
ENGLISH
59
loading