cecotec BOLERO COOLMARKET 2D 211 WHITE Manual De Instrucciones página 28

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
ENGLISH
14. Move the freezer-compartment door bushing from the top right to the top left. Move the
left hole cover to the right side. Fig. 11
15. Remove the screw hole cover from the centre-hinge screw hole on the left side of the
refrigerator, then install it into the screw holes on the right side of the refrigerator. Fig. 12
16. Install the centre hinge on the left side with the two screws removed earlier. Fig. 13
17. Remove the screw holding the freezer-compartment door stop on the lower-right side,
then remove the door stop and install it on the lower-left side. Fig. 14
18. Install the freezer-compartment door.
19. Move the freezer-compartment door bushing from the top right to the top left. Move the
cover from the left hole to the right hole. Fig. 15
20. Remove the cover from the hole in the top left-hand side of the refrigerator and attach
the cover to the top right-hand side of the refrigerator. Fig. 16
21. Attach the top hinge to the top-left side of the refrigerator with the three screws removed
earlier. Before tightening the top hinge screws, make sure that the top of the door is level
with the refrigerator and that the rubber gasket makes a good seal.
22. Place the cover on top of the hinge on the top left side of the refrigerator. Fig. 17
Fig. 3 key:
Hinge cover
1.
2.
Screws
3.
Upper hinge
Fig. 4 key:
1.
Refrigerator-compartment door
2.
Centre hinge
3.
Screws
Fig. 5 key:
1.
Levelling foot
Fig. 6 key:
2.
Lower hinge
3.
Screws
Fig. 7 key:
1.
Pin shaft
Fig. 8 key:
Pin shaft
1.
B O LE R O COOLM ARKET 2D 211 W H IT E
54
Fig. 10 key:
1.
Refrigerator-compartment door
2.
Door stop
Fig. 11 key:
1.
Bushing
2.
Hole cover
Fig. 12 key:
1.
Screw-hole cover
Fig. 13 key:
1.
Freezer-compartment door
2.
Centre hinge
3.
Bushing
Screws
4.
Fig. 14 key:
1.
Freezer-compartment door
Door stop
2.
Fig. 15 key:
1.
Bushing
Hole cover
2.
Fig. 16 key:
1.
Hinge screw hole cover
Fig. 17 key:
1.
Hinge cover
2.
Screws
Upper hinge
3.
4. OPERATION
Temperature settings. Fig. 18
-
The appliance temperature can be adjusted by turning the thermostat knob.
-
The thermostat knob can be set from 1 to 7.
-
1 is the warmest setting
-
7 is the coldest setting
BOLERO COOLMARKET 2D 211 WHITE
ENGLISH
55
loading