Hilti TE 4-A22 Manual De Instrucciones Original página 22

4 Technical data
4.1 Rotary hammer
Weight in accordance with EPTA Procedure 01 including B22⁄8.0 battery
Single impact energy in accordance with EPTA procedure 05/2009
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in wood (solid)
Drilling diameter range in metal (solid-head drill bit)
4.2 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound power level (L
WA
Emission sound pressure level (L
Uncertainty (noise values) (K
Total vibration
Hammer drilling in concrete (a
Uncertainty (K)
4.3 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Operation
5.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the tool holder from the front and into the recess provided.
18 English
)
)
pA
and K )
pA WA
)
h, HD
2
98.8 dB(A)
87.8 dB(A)
3 dB(A)
B 22/2.6 Li­Ion (02) 13.1 m/s²
B 22/8.0 Li-Ion 9.6 m/s²
1.5 m/s²
2100244
TE 4­A22
3.9 kg
2 J
4 mm ... 28 mm
3 mm ... 20 mm
3 mm ... 10 mm
21.6 V
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
*2100244*