Hitachi SPX-WKT2 Manual De Instrucciones página 7

8. DISPLAY ROOM TEMPERATURE (SERVICE MENU)
Room temperature(around remote controller) can be displayed
1 Press and hold and
during the normal mode (when unit is not operated).
The service menu will be displayed.
Select "Display room temp" from the service menu and press "OK".
The confirmation screen will be displayed.
9. CONTACT INFORMATION REGISTRATION (SERVICE MENU)
Contact information can be registered from "Contact information".
1 Select "Contact information" from the service menu and press "OK".
The contact information 1 will be displayed.
2 Press to change font type.
3 Press " " to select letter.
4 Press "OK" to confirm the letter. (Max.: 28 letters)
simultaneously for at least 3 seconds
2 Select "Yes" by pressing ""or "" and press "OK". The setting
will be confirmed and the screen will return to the normal mode.
5 Select "FIN." and press "OK" (or simply press
information 2" will be displayed.
6 Repeat (3)-(5) to register the contact information 2.
Select "FIN." and press "OK", the confirmation screen will be displayed.
(Also press and the confirmation screen will be displayed. )
7 Select "Yes" and press "OK". The service menu will be displayed
after setting is confirmed.
If "No" is pressed, the screen will return to (3).
- 7 -
). "Contact