Operation Method; Operation Start/Stop; Basic Operation; Operation Mode Select - Hitachi SPX-WKT2 Manual De Instrucciones

4. OPERATION METHOD

4.1 OPERATION START/STOP

1 Operation start
Press " " (START/STOP). The operation indicator lamp
will be turned on and the operation will be started.

4.2 BASIC OPERATION

1 Item Selection
By pressing "" or "" , the icon "
next item in order of the indications "MODE", "SPEED",
"SWING" and "TEMP".

4.3 OPERATION MODE SELECT

1 Press "" or "" and select "MODE".
2 By pressing "" or "", the operation mode will be
changed as follows.
AUTO HEAT
4.4

ROOM TEMPERATURE SETTING

1 Press "" or "" and select "TEMP".
" will move to the
DRY COOL FAN
2 Operation stop
Press " " (START/STOP) again. The operation indicator lamp
will be turned off and the operation will be stopped.
2 Changing Setting
When the item ("MODE", "SPEED", "SWING" OR "TEMP") is
selected, press "" or "". The setting will be changed.
3 MODE Function
• Automatic Operation (AUTO)
To cooling and heating at automatic changeover depending
on the current room temperature.
However, the mode of operation will not change, when the
indoor unit is connected to multi type outdoor unit.
Temperature range can be set between 16°C and 32°C.
• Heating Operation (HEAT)
To increase the room temperature.
Temperature range can be set between 16°C and 32°C.
• Dehumidifying Operation(DRY)
To decrease the humidity in the room.
Temperature range can be set between 16°C and 32°C.
• Cooling Operation (COOL)
To decrease the room temperature.
Temperature range can be set between 16°C and 32°C.
• Fan Operation (FAN)
To circulate the air in the room.
2 By pressing "", the temperature is increased by 1°C.
(Max. 32°C)
By pressing "", the temperature is decreased by 1°C.
(Min. 16°C)
Keep pressing and the value will change more quickly.
- 6 -