Beta 3030H/2T Instrucciones página 9

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
EN I
Lift the vehicle as follows:
Before lifting, halt the vehicle in place by using the parking brake and/or placing two wedges at the wheels.
• Position the jack under such lifting point as recommended in the vehicle manufacturer's manual.
• Turn the handle end clockwise, until it is completely down.
• Pump the jack until the required height for the load is reached.
• After the vehicle has been lifted, secure it on appropriate axle stands, before carrying out any jobs under the vehicle.
• When the job is completed, lift the vehicle and remove the stands.
• Turn the handle anticlockwise to make the vehicle go down and touch the ground.
After the jack has been used, and if it is not used for prolonged periods, it should be completely down, and it should be
stored in a safe, suitable place.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact Beta Untensili
S.P.A.'s repair centre.
DISPOSAL
The jack must be disposed of in compliance with the laws in force in the country where it is used.
WARRANTY
This equipment is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month
warranty for professional use and a 24-month warranty for non professional use respectively.
replacing them at our discretion. Should assistance be required once or several times during the warranty period, the ex-
piry date of this warranty will remain unchanged. This warranty will not cover defects due to wear, misuse or breakdowns
caused by blows and/or falls. In addition, this warranty will no longer be valid if any changes are made, or if the jack is
forced or sent to the customer service in pieces. This warranty explicitly excludes any damage to people and/or things,
whether direct or consequential.
DECLARATION OF CONFORMITY
We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of
Machine Directive 2006/42/EC and amendments thereto.
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
9