Beta 3030H/2T Instrucciones página 6

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR HYDRAULIC JACK MANUFACTURED BY:
BETA UTENSILI S.P.A.
VIA A. VOLTA 18
20845, SOVICO (MB) ITALY
ORIGINAL DOCUMENTATION DRAWN UP IN ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
• suitable for lifting means of transport
• use as a support
• use under the vehicle that is being lifted
• use for any applications other than those it has been designed for
• lifting and/or moving people
• the use of the hydraulic jack for handling loads is prohibited
• maximum loading capacity stated in TECHNICAL DATA table must not be exceeded.
WORK AREA SAFETY
For reasons of safety, the hydraulic jack must be used by one person.
Keep children and bystanders away from your workplace while operating the jack. Distractions from other
people can cause you to lose control over the jack.
result in load instability.
Do not lift the load in narrow areas, not to run the risk of getting trapped.
Do not use several jacks on the same load simultaneously.
Before starting lifting operations, secure the vehicle with the emergency brake and/or place two wedges
at the wheels.
Before lifting a loaded vehicle, check that the load is stable.
Do not stand under the load before placing it on suitable stands.
While the jack is being used, the engine of the vehicle must be off.
Do not use the hydraulic jack in environments containing potentially explosive atmospheres.
Avoid contact with live equipment as the lift is not insulated.
6
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING
THE HYDRAULIC JACK. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
EN I