Fein AKFH18-5T AS Serie Instrucciones De Uso página 12

en
12
Intended use of the power tool:
hand-guided bevel milling machine for pro-
fessional use by instructed operating per-
sonnel in weather-protected environments
using the application tools and accessories
recommended by FEIN:
– for machining workpieces made of steel,
cast steel, fine-grained steel, stainless
steel, aluminum, aluminum alloys, brass
and plastic
Symbols.
Symbol, character
max.50°C
Explanation
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
AMPShare is the shared battery system that allows you to use many
tools from many professional brands with just one battery.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Do not touch the rotating parts of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
Do not charge damaged batteries.
Protect the battery against heat, e.g., against continuous intense sun-
light, fire, debris, water, and moisture.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
A surface that can be touched may be very hot and thus hazardous.
This symbol confirms the certification of this product for the USA
and Canada.
– for commercial use in industry and trade
– for the preparation of K-, V-, X- and Y-
shaped welding joints
– for machining visible edges in plant,
equipment and general engineering
– for rounding edges for optimal paint
preparation or as impact protection