STORAGE
REPAIR PATCH INSTRUCTIONS
WARNING: Repair patches must be applied by an adult
only.
KEEP OUT OF REACH OF CHILDREN.
18
Fold over only
Compress air out as you are
rolling up the inflatable bouncer.
INSTRUCTION:
1. Deflate the item, clean the area and allow to dry thoroughly.
2. Cut a portion of the patch to the size needed and round the
corners. (See Fig).
3. Remove the adhesive backing from the patch material, position
the patch over the damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
CORRECT
INCORRECT
INSTRUCTIONS FOR WATER PARK
MAINTENANCE
As an outdoor product, the water park is subject to wear and
deterioration. Inspect for signs of fabric failure; weak or torn
surfaces must be repaired promptly.
• To keep the product clean: wipe the water park or blower using a
dry cloth or a cloth dampened with a neutral, noninflammable,
nontoxic cleaning and sanitizing solution or pure water.
• Product should never be stored wet. Allow to dry before rolling up.
OR
19