EVVO CLIMA P9 FRIO Y CALOR Manual De Instrucciones página 42

Ventilador portátil
ENGLISH
appliance to start running normally again.
Sleep mode
In cooling mode, press the increase and decrease icons to activate the Sleep mode.
The device will operate saving energy and silently.
Increase and decrease icons
Use these icons to increase or decrease temperature and time.
Temperature cannot be increased or decreased in fan or dehumidification mode.
Fan speed
Under the cooling mode, press the iconto select high or low wind speed operation.
This option is not available under the dehumidification mode.
NOTE:
Under certain conditions (defrost), it may not operate at the selected speed.
Timer
Press this iconto set the timer. When the timer symbol blinks, use the increase and
decrease icons to select the desired operating time.
The timer can be set from 1 to 24 hours, and the digits increase and decrease by 1 hour.
Oscillation
Press this button to activate the air oscillation.
Drainage instructions
When the air conditioner stops operating because the water tank is full, turn it off and
unplug it from the power supply. The full tank indicator (FULL) will start blinking and
the appliance will not operate until the water inside the tank is drained.
Manual drainage. Fig. 10
1. Place a container below the water outlet behind the body.
2. Unscrew the drain cap and unplug the water plug. The water will automatically flow
into a container.
NOTE:
Move the device carefully, so as not to spill the water in the water tank at the bottom
42
EVVO VENTILADOR PORTÁTIL CLIMA P9 FRÍO Y CALOR
loading

Este manual también es adecuado para:

V0382