Mammut Signal Option; Warranty; Eu Declaration Of Conformity - AL-KO AMS2 Mammut Tandem Manual De Instrucciones

MAMMUT SIGNAL OPTION

You can optionally activate the sounding of a signal on the remote control. The mammut signal is deac-
tivated when the system is delivered.
The remote control must be switched off and the system must be inactive.
Switching on
1. Simultaneously press buttons e and f on the remote control.
2. Keeping the buttons pressed, switch on the remote control at the ON/OFF switch (b).
First an LED self-test is carried out, then calibration mode is activated. The operating state LED
flashes red. You can now release both buttons.
3. To activate the mammut signal, press buttons e and g.
4. Then switch off the remote control at the ON/OFF switch (b).
The mammut signal sounds immediately after switching on the remote control, once the LED
test is completed.
Switching off
1. Press keys (e and f) simultaneously on the remote control.
2. Switch the remote control on at the on/off switch (b) whilst holding the keys pressed.
An LED self-test is performed first, then calibration mode is activated. The operating status LED
flashes red. You can release both keys.
3. To deactivate the Mammut sound, press the keys (d and f).

WARRANTY

We will resolve any material or manufacturing faults during the legal warranty period in accordance with
our choice of either repair or replacement. The legal warranty period is determined by the legislation of
the country in which the machine was purchased.

EU DECLARATION OF CONFORMITY

We hereby declare that this product in the version introduced into trade by us, complies with the requi-
rements of the harmonised EU Directives, EU safety standards and the product-specific standards.
Product
AL-KO manoeuvring system
Manufacturer
ALOIS KOBER GmbH
Ichenhauser Str. 14
D-89359 Kötz
Duly authorised person
ALOIS KOBER GmbH
Head of Technical Development, Stan-
dardisation/Data Management depart-
ment
Ichenhauser Str. 14
D-89359 Kötz
694 570_e
Type
AMS2 Mammut
EU Directives
2006/42/EC
2004/108/EC
R&TTE 1999/5/EC
Serial number
F100940008
Harmonised standards
DIN EN ISO 12100 -1+2
DIN EN ISO 14121-1
DIN EN ISO 13849-1
Kötz, 03/03/2014
Dr. Klaus Wilhelm, Head of
Technology
en
39