Switching Off After Sustained Operation; Care And Maintenance - Hilti SD 5000-A22 Manual De Uso

3. Insert the bit in the head of the screw and use the control switch to
regulate the speed of the screwdriver.
4. Refit the depth gauge after removing the screws.
6.3 Switching on in sustained operating mode
▶ Switch on in sustained operating mode.

6.4 Switching off after sustained operation

▶ Press the control switch.
▶ The lock button returns to its original position.
6.5 Screwdriver / depth gauge interface
1. Pull the depth gauge away from the power tool, releasing the snap-on
connection.
2. Pull the depth gauge forward, away from the power tool.
With the drive spindle exposed in this way, the following operations
can be carried out:
removing screws (set to reverse rotation),
changing bits,
changing bit holders,
changing to magazine operation,
redriving screws.
7

Care and maintenance

7.1 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
12 English
6
7
2242466
*2242466*