Idiomas disponibles
Idiomas disponibles
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
Making pasta sheet
• Position the machine on a suitable surface which can bear
the appliance's weight.
• Fit the container/ tray (not supplied) to the appliance's open-
ings for placing the pasta sheet.
• After turning the knob to the position "7", place part of the
prepared dough on the rollers.
• Press down the ON/OFF button to start operation & making
pasta sheet.
• Insert the dough gently and this will roll out the pasta. Repeat
this operation until a flat sheet of pasta is obtained.
• To reduce the thickness of the pasta sheet, press down the
ON/OFF button again of the appliance. And turn the knob to
reduce the distance between the pasta rollers.
• Pass the pasta sheet repeatedly through the rollers until it is
of the desired thickness.
Note: Please check with your recipe for making the dough.
Cutting
• Position the machine on a suitable surface which can bear
the weight, fit the supplied clamp into the opening, tightening
the screw until the machine is firmly locked to the surface.
• Fit the container/tray (not supplied) to the pasta machine's
openings for placing the pasta.
• Press down the ON/OFF button to start operation & cutting
the pasta sheet.
• Fit the pasta sheet to the machine with your desired cutting
blade (tagliatelle or fettuccine).
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
• DANGER OF INJURY! Care should be taken when handling
the sharp cutting blades during cleaning.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
Transportation and Storage
• Before storage, always make sure that the appliance has
been disconnected from the power supply and completely
cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could
damage it.
• Do not move the appliance while it is under operation. Dis-
connect the appliance from power supply when moving and
hold it at the bottom.
Troubleshooting
If the appliance does not function properly, please check the
below table for the solution. If you are still unable to solve the
problem, please contact the supplier/service provider.
Problem
Possible cause
The appliance does
The appliance
not start operation
isn't plugged in
or stops suddenly.
correctly.
The appliance isn't
switched on.
Warranty
Any defect affecting the functionality of the appliance which
becomes apparent within one year after purchase will be re-
paired by free repair or replacement provided the appliance has
been used and maintained in accordance with the instructions
and has not been abused or misused in any way. Your statutory
rights are not affected. If the appliance is claimed under war-
ranty, state where and when it was purchased and include proof
of purchase (e.g. receipt).
GB
Possible solution
Plug in the appli-
ance correctly.
Press the ON/OFF
button.
7
