Idiomas disponibles
Idiomas disponibles
3. Insert AC input and output cables according to polarities indicated on terminal
block and tighten the terminal screws. Be sure to connect PE protective conductor
first ( ).
AC input:
AC output:
4. Make sure the wires are securely connected.
WARNING: Be sure to that AC power source is disconnected before attempting to
hardwire it to the unit.
CAUTION: Be sure to connect AC wires with correct polarity. If L and N wires are
connected reversely, it may cause mains short-circuited when these inverters are
running in parallel.
CAUTION: Appliances such as air conditioner are required at least 2~3 minutes to
restart because it is required to have enough time to balance refrigerant gas inside of
circuits. If a power shortage occurs and recovers in a short time, it will cause damage
to your connected appliances. To prevent this kind of damage, please check
manufacturer of air conditioner if it is equipped with time-delay function before
installation. Otherwise, this inverter/charger will trig overload fault and cut off output to
protect your appliance but sometimes it still causes internal damage to the air
conditioner.
49
