Idiomas disponibles
Idiomas disponibles
Charge state
PV energy and mains can charge
batteries.
Bypass state
Error are caused by inside circuit
error or external reasons such as
over temperature, output short
circuited and so on.
Off mains state
The inverter will provide output
power from battery and PV power.
Stop mode
The inverter stop working if you
turn off the inverter/charger or
error has occurred in the condition
of no mains.
4.8 LCD general operation information
The LCD display information will be switched in turns by pressing "UP" or "DOWN" key.
The selectable information is switched as below order: battery voltage, battery current,
inverter voltage, invert current, mains voltage, mains current, load in watt, load in VA,
mains frequency, inverter frequency, PV voltage, PV charging power, PV charging output
voltage, PV charging current.
Selectable information
Battery voltage / DC discharging current
Inverter output voltage / Inverter output current
Mains voltage / Mains current
Load in Watt
Mains frequency / Inverter frequency
PV voltage and power
PV charger output voltage and PV charging current
LCD display
63
