Sharp RT-350H Manual De Manejo página 8

POINTS TO REMEMBER FOR OPERATION
* POWER SWITCH
Turn the POWER switch ON to operate. When finished,
push the switch to place the unit in dy) STAND-BY.
e Unplug the AC supply lead when not being used for
prolonged periods of time.
@ The sound of gears may be heard at times wanen the
unit is turned ON.
+ * DIGITAL TAPE COUNTER
When the DIRECTION indicator > is lit, the counter will
increase during recording, playback or fast forward and
decrease when rewinding.
When the DIRECTION indicator 4 is lit, the counter will
decrease during recording, playback or fast forward and
increase when rewinding.
GES GES GER EP Gs Ge
GER GER GSH GEE GEE Ga GES
* EJECT BUTTON * TAPE TRAVEL DIRECTION INDICATOR
Push this button to open the cassette compartment When the POWER switch is turned ON, the DIRECTION
door when the tape is stopped. indicator will always light to " p". ;
AUTO TAPE SELECTOR
TAPE SELECT If the TAPE SELECT switch on the rear of the unit is set to AUTO, the tape type (METAL, CrOz or
METAL AUTO
NORMAL} will be automatically selected for proper recording and a
by simply placing the
tape in the cassette compartment.
NORMAL CrO2 METAL
O O CT]
a ee
No Detection hole
CrOz tape Detection hole A
® Some tape manufacturers do not
provide detection hole B for
METAL tapes. [f you are using this
type of tape, you must set the
TAPE SELECT switch to METAL,
otherwise the tape indicator will
display CrOe.
Detection hole
NOTES:
e Fe-Cr tapes cannot be used. @ The automatic tape select function will not function when the
e If no tape is in the compartment when the power is turned ON, TAPE SELECT switch is set to METAL. The TAPE INDICATOR
the TAPE INDICATOR will display METAL as the type of tape in will display METAL even if a NORMAL or CrOz tape is used.
use.
[E] 6