Idiomas disponibles
Idiomas disponibles
Operation
Point the remote control unit at the remote sensor window and
press the desired operation button.
If the remote contro! unit will only operate from a short distance
or narrow angle, this indicates that the battery voltage is low.
Replace both the batteries with new ones.
When replacing the batteries, clean all the remote control and
battery terminals with a dry cloth.
How to load the batteries
|
Open the battery compartment cover and remove it.
2
Inserttwo AA, R6, UM-3 or equivalent size batteries into
the battery compartment as shown in the illustration.
3 Replace the battery compartment cover.
Cautionary notes
@ Avoid dropping the remote control or getting it wet.
e Avoid exposing the remote control to direct sunlight or strong
light as this may cause malfunction.
Note:
e Use new batteries only.
© When replacing the batteries, replace both batteries at the
same time. Do not mix an old battery with a new one.
® When you do not plan to use the remote control unit for along
period of time, remove the batteries.
@ insert the batteries following the polarity guides (- and +) in
the battery compartment.
@ Nickel cadmium (Ni-Cd) batteries are not recommended.
Make Your Contribution to Protect the Environment
Used batteries with the ISO symbol for recycling
OY
as well as small accumulators (rechargeable bat-
&
teries), mini-batteries (cells) and starter batteries
&
should not be thrown into the garbage can.
Please leave them at an appropriate depot.
:
29A-En
