Idiomas disponibles
Idiomas disponibles
j
Attach 1 wide glide to the right side (B) with 3 screws (K).
(K) x6
IMPORTANT: The rubber bumper
should be facing the back of the
side as shown.
TIP: It may be necessary to slide
the moving part of the glide to
access the mounting holes.
(L) x4
(M) x4
(N) x4
Il
Repeat to secure the remaining glide wide to the left side ( A).
With the smooth side of the floor ( C) facing up, use 2 bolts
(L), washers ( M) and nuts ( N) to attach 1 large drawer glide
(0) to the floor ( C).
NOTE: If not already done, pierce the 4 holes on the bottom
of the floor (C) using a screwdriver.
IMPORTANT: Orientation is critical. Refer to images for
correct placement.
Repeat for the remaining large drawer glide ( 0).
9
