HEIDENHAIN MSE 1300 Instrucciones De Instalación página 30

Connecting a cable with an M8 connector MSE 1401 (ID 747507-02)
Covers are provided for I/O connections. Leave the cover on unused connections.
To connect a cable with an M8 connector:
Verify that power is off or disconnected
X X
Remove the connector cover using a flat-edge screw driver and turning
X X
counterclockwise.
Align the cable connector with the module connector
X X
Insert the cable connector into the connector on the front of the module
X X
Hand tighten the M8 cable connector onto the module
X X
Connecting and disconnecting a compressed air tube
The MSE 1501 provides 4 mm tube connections for compressed air input and output.
To connect a compressed air tube:
Verify that power is off or disconnected
X X
Insert the 4 mm tube into the connector on the front of the module
X X
To disconnect a compressed air tube:
Verify that power is off or disconnected
X X
Push in on the blue connector ring and remove the 4 mm tube
X X
7 8 9
M8 connectors
10 12
Compressed air connector
30