HEIDENHAIN MSE 1300 Instrucciones De Instalación página 26

Releasing a module
Verify power is removed from all power supply modules in the module chain
X X
Press a flat-edge screwdriver into the lock tab receiver 15 opening at the top
X X
left of the right hand module and press down on the lock tab 3 of the left hand
module to release the module
Gently apply upward pressure, depressing the DIN rail spring 18
X X
While maintaining upward pressure, rotate the top of the module away from the DIN
X X
rail
Gently release the upward pressure, releasing the module from the DIN rail
X X
5. Installation
The safety of any system incorporating the use of this product is the
responsibility of the assembler or installer of the system.
Notice
Do not engage, or disengage any connections while the unit is under power.
Damage to internal components may result.
Releasing a module
26