HEIDENHAIN MSE 1300 Instrucciones De Instalación página 22

4. Specifications
The MSE 1000 is an advanced system for performing production integrated
measurements at high levels of precision and accuracy. The modules described in these
instructions are designed for indoor use only. The MSE 1000 components shall only be
installed as described in these instructions. Mounting, installation and maintenance are to
be performed by qualified personnel only.
Power consumption
Data transfer
Addressing
Operating temperature 0 °C ... 45 °C
Storage temperature
Relative humidity
Altitude
Degree of protection
Overvoltage category
Pollution degree
Mass
Input pressure
3)
Power requirement of the module. Connected sensors must be considered additionally.
4)
Power requirement of the module including active inputs and outputs supplied internally.
Refer to "Relay outputs"and "Switching inputs" on page 204 for further information.
MSE 1401
MSE 1332
1) 2)
747509-01 747507-01
2)
747509-02
3) 4)
3.2 W 6.1 W
Standard Ethernet, IEEE 802.3
Fixed IP address or DHCP
-20 °C ... 70 °C
† 80 %
† 2000 m
1) 2)
IP65 IP40
II, intended to be supplied from the building wiring
2
420 g 420 g
MSE 1401 MSE 1501
1) 1)
747507-02 747508-01
2)
747508-02
4)
3.7 W
440 g 460 g
max. 700 kPa
22