Chicco QUASAR FIX i-SIZE Manual De Instrucciones página 19

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Never use abrasive detergents or solvents. Do not dry the fabric cover
within a dryer, let it dry without squeezing it.
The fabric cover must only be replaced with another cover approved
by the manufacturer, since it is an integral part of the child car seat
and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child car seat, never use it
without its fabric cover.
To remove the fabric proceed by pulling the cover off the frame
HOW TO CLEAN THE PLASTIC AND METAL PARTS
Clean the plastic and coated metal parts with a damp cloth only. Nev-
er use abrasive detergents or solvents.
The moving parts of the child car seat must not be lubricated.
CHECKING THE CONDITION OF THE COMPONENTS
It is recommended to regularly check the condition of the following
components to make sure they are not damaged or worn:
• Fabric cover: check that the padding does not come out from the
seams. Check the condition of the seams: they must always be in-
tact and undamaged.
• Harness straps: make sure there is no abnormal wear in the fabric
weave with clear signs of thinning near the adjustment strap.
• Plastic parts: check that the plastic parts are not worn out, damaged
or faded.
STORING THE PRODUCT
When it is not fitted in the car, it is recommended to store the child
car seat in a dry place, away from sources of heat and to protect it
from dust, humidity and direct sunlight.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies with the original safety
standards, stop using it and dispose of it at an appropriate collection
point. Always dispose of the child car seat following the guidance
and regulations set out in the country of use.
WARRANTY
The product is guaranteed against any lack of conformity under nor-
mal use as specified in the instructions.
The warranty shall not therefore apply in the case of damage caused by
improper use, wear or accidental events. For the duration of warranty
on conformity defects please refer to the specific provisions of national
laws applicable in the country of purchase, where provided for.
19
loading

Este manual también es adecuado para:

Quasar i-size