Angelo Po 0N1FR1I Manual De Uso página 155

Idiomas disponibles
  • ES

Idiomas disponibles

HANDLING AND INSTALLATION
Connecting to a fan extractor hood
To carry out this operation, proceed
as follows.
Position the appliance un-
1)
derneath the hood (A) as
shown in the diagram.
WARNING:
The gas supply tap must
open automatically when
the fan of the extraction sy-
stem is switched on.
HAZARD: Before doing any work, cut
off the mains electricity supply.
The manufacturer has tested the appliance with
its own mains gas, identifi ed by the sticker ap-
plied to the nameplate.
If the type of gas to be connected is diff erent
from that used for testing, proceed as follows.
Turn off the gas supply tap (A).
1)
Change the burner nozzle (see page 16).
2)
Adjust the gas solenoid valve (see page 15).
3)
Remove the testing gas sticker from the da-
4)
taplate (B) and apply the new one to identify
the gas being used.
Remove the sticker from the appliance and
5)
apply the new one (C) with the category of
the country of installation.
NOTE: On completion of the opera-
tion, make sure that there are no gas leaks
or malfunctions.
3269860_inst_GB_rev.2
A
CONVERSION OF GAS SUPPLY
C
B
A
AL
II2H3B/P: G20/20mbar, G30/30mbar
AL
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
3P
AT
II2H3B/P: G20/20mbar, G30/50mbar
AT
II2H3P: G20/20mbar, G31/50mbar
BE
II2E+3+: G20-G25/20-25mbar, G30-G31/28_30-37mbar
BE
II2E+3B/P: G20-G25/20-25mbar, G30/30mbar
BE
II2E+3P: G20-G25/20-25mbar, G31/37mbar
BE
II2E+3B: G20-G25/20-25mbar, G30/30mbar
BG
II2H3B/P: G20/20mbar, G30/30mbar
BG
II2H3+: G20/20mbar, G30-G31/28_30-37mbar
G20
kW
m3/h
mbar
G31
G25
m3/h
mbar
kW
G30
kW
Kg/h
mbar
G20
m3/h
mbar
G31
kW
G25
m3/h
kW
mbar
G30
kW
mbar
Kg/h
ENGLISH
IS
II2H3B/P: G20/20mbar, G30/30mbar
IS
II2H3+: G20/20mbar, G30-G31/28_30-37mb
IT
II2H3+: G20/20mbar, G30-G31/28_30-37mb
IT
II2H3B/P: G20/20mbar, G30/30mbar
IT
II2H3P: G20/20mbar, G31/37mbar
LT
II2H3+: G20/20mbar, G30-G31/28_30-37mb
LT
II2H3B/P: G20/20mbar, G30/30mbar
LT
II2H3P: G20/20mbar, G31/37mbar
LU
II2H3B/P: G20/20mbar, G30/30mbar
LU
II2H3+: G20/20mbar, G30-G31/28_30-37mb
A
kW
mbar
Kg/h
~
~
TYPE
01
0051
mbar
kW
Kg/h
~
~
~
TYPE
01
rif.
0051
~
CE n.
rif.
CE n.
13
loading

Este manual también es adecuado para:

0t1fr1i0n1fr7i0t1fr7i1n1fr2i1t1fr2i