Idiomas disponibles
Idiomas disponibles
ENGLISH
TECHNICAL INFORMATION
See paragraph "GENERAL DESCRIPTION OF
APPLIANCE" of the User instructions manual.
See paragraph " OPTIONAL ACCESSORIES" of
the User instructions manual.
See paragraph "INSTRUCTIONS AND WARN-
INGS FOR REGULATIONS" of the User instruc-
tions manual.
INSTRUCTIONS AND WARNINGS FOR SERVICING
NOTE: Carefully read the hazards
mentioned in section "Hazards and safety
provisions during servicing" of the "user in-
struction manual".
Keep the appliance at peak effi ciency by car-
rying out the scheduled servicing procedures
recommended by the Manufacturer. Proper
servicing will ensure the best performance, a
longer working life and constant maintenance
of safety requirements.
WARNING: Before carrying out any
servicing procedure, activate all the safety
devices provided and decide whether staff
at work and those in the vicinity should be
informed.
In particular, turn off the gas supply tap, cut
off the electricity supply using the master
switch and prevent access to all devices that
might cause unexpected health and safety
hazards if turned on.
Also make sure that during the maintenance
6
GENERAL DESCRIPTION OF APPLIANCE
OPTIONAL ACCESSORIES
INSTRUCTIONS AND WARNINGS FOR SAFETY
SERVICING
TECHNICAL INFORMATION
procedure, that the operator is always able
to check whether the plug is disconnected
from the power outlet.
Every 1250 working hours have skilled, au-
thorised personnel carry out the following op-
erations:
– A check on the gas pressure and system
tightness.
– A check on the effi ciency of the fl ues, clean-
ing them if necessary.
– Check that the safety thermostat is working
correctly.
– Check that the electrical system is in good
working order.
Every year, have skilled, authorised personnel
carry out the following operations:
– Check that the ignition plugs are working
properly ( and replace them if necessary, see
pag. 17) and that the power supply cable is
intact.
3269860_inst_GB_rev.2
